INCLUDES POSTAGE AND HANDLING
Within Australia

Do you have mercury in your system?

Fulhealth's new Multi Metal Test Kits are out. Test yourselves and your environment for heavy metals. It shows up as an easy to read colour meter, it can determine metals such as; mercury, cobalt, lead, zinc, copper, and cadmium. If you show positive for heavy metal toxicity then we also have designed the Multi Metal D-tox which will safely chelate all the metals detected and more.

A colour metric system is how the Heavy Metal Test Kits work. When activating a test the colour will start at green (no ionic metals). When a heavy metal is introduced that green colour will react. Take copper for example; the green colour will quickly change to brown indicating a copper toxicity. Now say that there are two heavy metals in the sample like copper and lead. Because in suspension copper is lighter then lead the copper will be sitting on top. So the result would be two bands of colour a brown band on top of an orange/red band. This is how you can determine what heavy metals are in your system and where they might be coming from. Also, when on the Multi Metal D-tox you will see a toxic colour like brown (copper) slowly turn back to the initial colour green as you detoxify.

Verifying the Heavy Metal Test Kit Efficiency

1. Take a fresh coated test tube, remove the cap and add approximately 0.5 ml (12 drops) of Solvent to the test tube.

 

2. Replace the cap and shake the test tube vigorously for about 30 seconds to effect dissolution of Dithizone in the solvent. Invert the test tube and let it stand using the cap as the base for another 30 seconds. The solution should now be green and fresh and ready for use.

 

3. Remove the test tube cap and add 2-3mL of distilled or deionised water sample and add it to the test tube. Replace the test tube cap.

 

4. Shake vigorously for about 5 seconds, and then invert the test tube using the cap as the base and let it stand so that the solution can be allowed to separate.

 

5. Read the top layer and compare it with the chart provided with the stand. It should read Green indicating no ionic Heavy Metals.

 

6. Now place a piece of copper wire (with insulation removed) in the test tube and shake vigorously for about 5-10 seconds.

 

7. The test will now show the presence of copper. This also indicates the aggressive nature of water in leaching metals.

Testing Mediums

Urine, Saliva, Perspiration and even a blood sample may be tested for Heavy Metal using the same procedure. The Heavy Metal Test Kit can also be used to determine the environmental sources of the contamination in aqueous solutions such as tap water. Since all Heavy Metal ions are water soluble, solids like food items, porcelain dishes, dust samples from carpets, wall paints and wall paper etc. can be tested for Heavy Metals after soaking them in distilled water. In addition to being an initial analytical screening tool for Urine, Saliva, Perspiration and Blood the test is also useful for finding the causes of contamination in the patient's environment.

Diphenylthiocarbazone (Dithizone)

In 1925 Helmut Fischer of the Siemens Concern in Berlin succeeded in detecting heavy metal ions by means of a dithizone process. As a reagent, dithizone is able to indicate the presence of heavy metal ions in qualitative and quantitative terms. Dithizone, in binding the metals (binds to Cu, Zn, Cd, Hg, Pb, Mn, Co, Ni,), form coloured complexes in the interior of the molecule which are soluble in nonpolar organic solvents. The coloration of these solutions is very intense, its particular coloration determined by the atomic radius of the respective metal present in the complex. The reaction times of the heavy metal ions vary; therefore, depending on their respective concentrations, different colorations may occur from which one can, in addition to the qualitative conclusions also semi quantitative ones regarding the contaminant. (At the lower ppm level, even at the ppb level).

Copyright © 2008 Fulhealthindustries Pty. Ltd. All rights reserved.